About Us
Product Categories
Hot Products
How to connect the wired remote control to the TV remote control
Release time：
2023-03-23 16:48
source：
Point the cable TV remote control at the TV remote control, press the setting button above the former, wait 2 seconds, release it after the red light is on, remember to press the key to learn on the cable TV remote control within 10 seconds, After flashing, it means the learning is complete.
The cable TV remote control generally has a learning area button at the top, among which there is a setting button. Press and wait for 2 seconds, and release the setting button after the red light is on. At this time, the remote control is in a learning standby state .
Use the head of the TV remote control to aim at the remote control of the cable TV. Note that you need to press the key to be learned on the remote control of the cable TV within 10 seconds; for example, the power button, the red indicator on the remote control flashes after pressing, indicating that it is receiving The state of the learning signal; due to the limited buttons in the learning area of the remote control. You can only select the power, TV/AV, volume +, volume-buttons in the TV area.
Note that you have to press and hold the power button of the TV remote control for about 3 seconds to transmit the learning signal, the indicator light of the remote control will flash three times quickly and then be on for a long time; at this time, release the power button of the TV remote control to complete the power button learning .
Related news
China Sales Service
Phone:+86-18589089676
E-mail: info@sensvisionsz.com
United States Sales Service
Tel: +1-360-999-8726
Email: ky@sensvision.us
